? 3D Design
Adjustment or modification of 3D models of components; if not possible internally, he will act as an intermediary between technical engineer and the external Chinese company performing the work.
Mold design, jigs, and, in general, all auxiliary equipment
Preparation of mold BOMs
? Product Development
Pattern drawing and coordination with the cutting department to ensure everything is clear
Supervising prototype development together with the department, until a sample is achieved that meets the customer’s requirements
? CNC Cutting
CNC program creation and verification of part compliance
Supervision of the pre-series together with the supervisor, and resolution of any issues reported by the operator
generally create the first program and personally cut the sample to verify for issues.
? Documentation Preparation
Creation and printing of all documents required for production (lamination manuals, quality documents, nesting documents); these can only be prepared by someone who knows how the part is made.
? Supervision/Resolution of Defects
In case of problems or defects during pressing/in the molding department, Mark will coordinate with the press manager to find a solution.
If the problem persists, he will act as a liaison with Thomas to resolve the issue.
? 3D設計
調整或修改零部件的3D模型；若無法內部完成，將溝通意大利工程師協調完成。
模具設計、夾具及所有輔助設備
準備模具物料清單（BOM）
與模具制造商對接并解決問題
模具進貨質量控制：驗證模具是否滿足所有要求規格。
? 產品開發
制作樣板圖紙并與裁剪部門協調確保內容清晰
協同部門監督樣品開發，直至獲得符合客戶要求的樣品
協同部門監督沖壓開發，設定沖壓參數直至獲得可重復且無缺陷的樣品
與意大利工程師共享數據，由其編制必要的技術說明書
? CNC裁剪
創建CNC程序并驗證零件合規性
與主管共同監督預量產階段，解決操作員反饋的問題
通常由其創建首套程序并親自裁剪樣品進行驗證
隨后監督預量產過程，若出現問題需負責修正程序（含生產期間）
? 文檔準備
制作并打印生產所需的所有文件（覆膜手冊、質量文件、套料文件）；這些文件只能由了解零件制造工藝的人員準備。
? 缺陷監督/解決
若沖壓/成型部門出現問題或缺陷，將與沖壓經理協調解決。
若問題持續存在，將作為聯絡人協調意大利工程師解決該問題。
聯系我時，請說是在廣州校園網上看到的，謝謝！